The phrase 8 cctv camera full set price covers two different purchases. One is a boxed kit of cameras, recorder, cable and power supply. The other is a supplied and installed system where the figure includes survey, cabling, configuration and handover. Malaysian buyers usually mean the second, and the two are rarely the same number.
Eyonic Sdn Bhd plans, supplies and installs monitoring systems with camera placement, recording and remote viewing for homes, offices, shops and industrial sites. That scope is what separates a full set from a carton of hardware.
What an 8 CCTV Camera Full Set Price Includes in Malaysia
A complete set normally bundles eight cameras, a recorder with at least eight channels, a storage drive, cable and power, plus the labour to mount and configure everything. The price moves with how much of that list is supplied and how much is left to the buyer.
Eyonic's published basic package is a Hikvision CCTV package at RM 1,599, covering camera supply and setup, basic recording configuration and mobile viewing handover. That figure is the closest approved price point to this query, and it is a package price rather than a per-camera rate. No supplied evidence states whether that package covers eight cameras or a smaller count, so it should be read as an entry point rather than a quote for eight.
For scale, Eyonic's Kuching Immigration Office project carried an approximate budget of RM 12,000 to RM 28,000, and the KTA Sarawak Sdn Bhd office project carried RM 8,000 to RM 18,000. Both were multi-area commercial jobs with wider scope than a single eight-camera set, which is why they sit far above the basic package.
Camera count, recorder channels and storage
Eight cameras need a recorder with at least eight channels. A recorder with exactly eight channels leaves no room to add a ninth camera later, while a sixteen-channel unit costs more but absorbs future expansion without replacing the box.
Storage is the quiet cost. Recording resolution, frame rate, the number of cameras and how many days of footage must be kept all feed into drive size. A set sold without a drive is not complete, because recording cannot start until one is fitted.
Cabling, power and installation labour
Cable length is a real variable. A shop with cameras clustered near the recorder uses far less cable than a factory with cameras spread across separate buildings, and the difference shows up in both material and labour hours.
Power design matters too. Cameras that draw power over the network cable need a switch or recorder that supplies it, while separate power supplies need their own points and protection. Labour is the least visible line in any 8 cctv camera full set price and often the largest.
How Eyonic Scopes an 8 CCTV Camera Full Set
Eyonic's CCTV installation process runs through four stages, and the price firms up as each one completes.
- Site survey to review the property, entry points and existing cabling.
- System proposal covering camera positions, recorder, storage and viewing setup.
- Installation of cameras, cabling, recorder and configuration.
- Handover with mobile viewing set up and the system explained.
The survey is where an eight-camera assumption gets tested. A property that looks like it needs eight cameras on paper may need fewer once coverage is mapped, or may need more once blind spots at gates, side lanes and back entrances are counted.
Lighting and placement checks before confirming a set
Eyonic recommends checking actual lighting conditions before confirming placement for ColorVu-style cameras. A camera that performs well under street lighting may behave differently in an unlit back lane, and a position chosen for coverage may deliver a poor image at night.
Placement also decides whether a face or a number plate is readable. Height, angle and distance from the target matter more than the camera count, and a set of eight badly placed cameras can be less useful than six placed well.
How to Compare Two 8 CCTV Camera Full Set Price Quotes
Two quotes for the same eight cameras can differ by thousands of ringgit without either being dishonest. The gap usually sits in scope, not in hardware.
Compare what each quote states about camera model and resolution, recorder channel count, storage size, cable type and length, whether power supply is included, whether installation and configuration are included, and whether mobile viewing is set up at handover. A quote that omits storage or labour is not comparable to one that includes them.
Ask whether the price holds if the site needs more cable than expected, and whether additional cameras can be added to the same recorder later. Those two answers reveal how much headroom the proposed design actually has.
What changes the figure most
Camera resolution and low-light capability drive hardware cost. Recorder channels and storage capacity drive the recording side. Cable runs, building construction and access difficulty drive labour. Commercial sites with multiple floors, outdoor runs or after-hours work sit at the higher end, which is consistent with the RM 8,000 to RM 28,000 range seen across Eyonic's completed office and public-building projects.
Residential and small shop installations sit closer to the basic package end. The RM 1,599 Hikvision CCTV package is the published entry point, and an eight-camera configuration with longer cable runs and larger storage will price above it.
Practical Limits on Any Published Figure
No supplied evidence gives a ringgit price for an eight-camera set specifically, and no supplied evidence gives installation labour rates, travel charges or site-specific pricing for Sarawak or elsewhere in Malaysia. Any figure quoted before a survey is an estimate built on assumptions about the property.
Current Hikvision Malaysia pricing and distributor pricing for an eight-camera kit are also not confirmed in the available evidence, so hardware costs should be verified at the time of enquiry rather than taken from older listings.
Share your location, property type and required system with Eyonic on WhatsApp at +60 11-5111 7959 for the next practical step.