That figure is the only camera-related price Eyonic publishes, and it covers more than the camera body. Buyers comparing listings often find a bare unit price online and then discover the quoted total includes survey work, cabling, recorder configuration and handover. Understanding which of those items sits inside the number is what makes a hikvision 2mp ip bullet camera price comparable between suppliers.
What the Hikvision 2mp Ip Bullet Camera price covers in a supply-and-install job
A quoted price for a Hikvision 2mp Ip Bullet Camera can mean three different things depending on the supplier. It may be the camera unit alone, the camera plus a recorder and storage, or a complete installed system. Only the third figure is directly comparable to a package price.
Eyonic's Hikvision CCTV Package at RM 1,599 is documented as covering camera supply and setup, basic recording configuration, and mobile viewing handover. Those three items describe a working system rather than a boxed camera, which is why the package figure sits above typical unit-only listings.
Items that commonly sit outside a camera-only price include mounting hardware, cable runs, power provision, recorder capacity, storage drives, and the labour to terminate and test every connection. A buyer comparing a unit price against a package price is comparing two different scopes, not two prices for the same job.
Eyonic does not publish a separate camera-only rate, a per-metre cabling rate, or a labour rate for Malaysian sites. Where those numbers matter to a budget, they have to come from a site-specific assessment rather than a published list.
Camera placement and lighting checks before a Hikvision 2mp Ip Bullet Camera is confirmed
Placement decisions change what a system costs because they change how much cable, how many mounting points, and how much adjustment time the job needs. A position that looks correct on a floor plan can fail once the actual light at that spot is measured.
Eyonic recommends checking actual lighting conditions before confirming placement for ColorVu-style cameras. The same discipline applies to any bullet camera: the light available at night, the direction of strong daytime sun, and the presence of reflective surfaces all affect whether a position delivers usable footage.
Bullet cameras suit outward-facing coverage along a wall, a gate line, or a perimeter where the camera body points in one direction. That makes them a natural fit for arrival areas, staff entrances, and visitor movement zones, which is the kind of coverage Eyonic delivered for the Kuching Immigration Office project in Sarawak.
Two constraints tend to raise cost during placement review. Long cable runs to a distant corner add material and labour, and a position that needs a pole, bracket, or conduit adds hardware that a simple wall mount does not. Both are site conditions rather than camera features, so neither appears in a unit price.
How a Hikvision 2mp Ip Bullet Camera fits an Eyonic CCTV Package at RM 1,599
The RM 1,599 Hikvision CCTV Package is the clearest published reference point for what a small installed system costs through Eyonic. It bundles camera supply and setup, basic recording configuration, and mobile viewing handover into one figure.
Within that structure, the camera is one component among several. The recorder determines how long footage is retained, the storage determines how many days of recording survive, and the network path determines whether remote viewing works reliably from a phone. A buyer focused only on the camera specification can end up with a system that records for too short a period or cannot be viewed remotely.
Eyonic's wider service scope covers camera placement, NVR setup, and remote viewing for homes, offices, shops, and industrial sites. That scope is what turns a camera purchase into a working monitoring system, and it is the reason package pricing exists at all.
Larger sites scale beyond a single package. Eyonic's Kuching Immigration Office project carried an approximate budget of RM 12,000 to RM 28,000, and the KTA Sarawak Sdn Bhd office project carried an approximate budget of RM 8,000 to RM 18,000. Both figures reflect multi-area coverage rather than a single camera position, which shows how far the range can move once a site has several zones to cover.
Site survey, proposal, installation and handover sequence
Eyonic's CCTV installation process runs through four stages, and each stage produces information that affects the final figure. The sequence below reflects that documented process.
- Site survey, where the property is assessed for camera positions, lighting, cable routes, and recorder location.
- System proposal, where the surveyed findings are turned into a defined scope and price.
- Installation, where cameras, cabling, and the recorder are fitted and configured.
- Handover, where recording behaviour and mobile viewing are demonstrated and the system is left in a working state.
The survey stage is where most price movement happens. A property with clear wall routes and an existing power point near the recorder needs less work than one requiring long exterior runs or a new power feed. Because the survey precedes the proposal, the quoted figure reflects the actual site rather than a generic assumption.
Handover matters more than it appears in a price comparison. A system that records correctly but cannot be viewed remotely has not delivered the same outcome as one where mobile viewing is confirmed working before the installer leaves. Eyonic's package wording includes mobile viewing handover as a named deliverable, which places that step inside the price rather than outside it.
What to send Eyonic for a Hikvision 2mp Ip Bullet Camera quotation
A useful quotation depends on three pieces of information: the location, the property type, and the required system. Those three items let a supplier judge cable routes, recorder placement, and how many camera positions the site actually needs.
Property type changes the answer significantly. A single-storey shop with a clear frontage needs far less cabling than a multi-level office with separate arrival, staff, and visitor zones. The Kuching Immigration Office project covered arrival flow, staff areas, and visitor movement as distinct areas, which is the kind of multi-zone requirement that moves a budget well above a single package.
Location matters within Sarawak because travel and site access affect scheduling. Eyonic works across Sarawak from Kuching, and the projects referenced here are both Kuching-based offices.
Where a buyer already has a preferred camera position in mind, sharing that position alongside the lighting conditions at that spot shortens the survey stage. Where no position has been chosen, the survey determines it, and the proposal follows from there.
Share your location, property type and required system with Eyonic on WhatsApp at +60 11-5111 7959 for the next practical step.
Why published unit prices and installed prices rarely match
Online listings for a Hikvision 2mp Ip Bullet Camera frequently show a unit figure without stating whether mounting, cable, recorder, or configuration are included. That omission is the main reason two prices for the same camera can differ by a wide margin.
Eyonic's published pricing is package-based rather than unit-based, which means the RM 1,599 figure already folds in supply, setup, recording configuration, and mobile viewing handover. A buyer comparing that against a bare unit price is comparing a finished system against a component.
Several details remain outside what Eyonic publishes: warranty terms, stock availability, delivery timelines, and any price difference between camera-only supply and full installation. Those are confirmed per job rather than listed publicly, so a quotation request is the point at which they become concrete.
For a Malaysian property, the practical approach is to treat any camera price as one line in a larger figure. The camera determines image quality; the survey, cabling, recorder, and handover determine whether the system works as intended after the installer leaves.