The search results for this term rarely help. Most pages that rank for hikvision colorvu 4mp ip camera price either hide the figure behind a trade login or list model numbers with no usable number attached. That leaves a buyer in Sarawak or elsewhere in Malaysia with no way to judge whether a quotation is reasonable.
What follows is the honest structure of the cost: which parts of a quotation move the number, which parts are fixed by the site rather than the product, and how a supplier builds a figure from a survey instead of a catalogue line.
What the Hikvision ColorVu 4MP IP camera price depends on
A camera unit is one line in a quotation. The rest of the figure comes from what has to happen around it: where it is mounted, what it records onto, how the cable reaches it, and who configures the recording and remote viewing.
Four cost drivers appear in almost every project:
- The camera itself, including form factor, lens and whether audio or active deterrence is built in.
- The recording and storage side, usually a network video recorder plus hard drives sized to the retention period required.
- Cabling, mounting and power, which depend on distance, ceiling or wall type, and whether PoE switching is already present.
- Configuration and handover, covering recording rules, mobile viewing and user training.
Two sites with the same camera count can land far apart once those four are priced. A single-storey shoplot in Kuching with accessible ceiling space is a different job from a multi-level office with solid walls and long cable runs.
Camera form factor and lens choice
ColorVu cameras are sold in several physical shapes, and the shape affects both the unit cost and the installation labour. Turret and dome bodies suit ceilings and covered walkways. Bullet bodies suit long outward views along a boundary or driveway. Each shape is mounted differently, and a bullet on a high wall usually needs more access equipment than a dome on a soffit.
Lens choice changes the number too. A fixed wide lens covers a doorway or a small room. A longer or varifocal lens reaches further down a lane or across a yard, and the extra reach is paid for in the unit price. Choosing a lens that is too wide for the distance means the face or plate is too small to be useful, which wastes the whole installation.
Audio and deterrence features sit in the same decision. A camera with a built-in microphone or speaker, or with a strobe and siren, is a different product line from a plain imaging unit, and the price reflects that. Whether those features are worth paying for depends on whether anyone will act on the audio or the alarm.
Lighting conditions at the actual site
ColorVu is designed to hold colour in low light rather than dropping to infrared black and white. That behaviour depends on the light actually present at the mounting point, which is why Eyonic recommends checking real lighting conditions before confirming placement for ColorVu-style cameras.
A camera looking at a lit porch behaves differently from one looking down an unlit back lane. Where ambient light is genuinely absent, the camera's own illumination becomes the deciding factor, and the distance it must cover sets how much of the scene stays usable. A position that looks fine on a floor plan can turn out to be the wrong spot once the night-time light is measured.
This matters for price because it can change the plan. A position that cannot deliver a usable image may need a different lens, a different mounting height, or a supplementary light source. Each of those is a real cost, and finding out before installation is cheaper than finding out after.
Recording, storage and installation scope
The recorder and drives are often the second-largest line after the cameras. Retention period drives drive capacity: keeping footage longer needs more storage, and more storage is more cost. The number of camera channels on the recorder also has to match the plan, with headroom if the site may expand.
Installation scope is where quotations diverge most. Supply-only means the buyer handles mounting, cabling and configuration. Supply-and-install means the supplier owns the whole chain, including cable routes, terminations, recorder setup, remote viewing and handover. The second is a larger figure but removes the risk of a system that is physically installed and not properly configured.
Existing infrastructure changes the arithmetic. A site that already has network cabling and a PoE switch needs less new work than one starting from nothing. A site with no cable path to the required camera position may need conduit, trunking or a longer route, and that labour is part of the price.
How Eyonic approaches a Hikvision ColorVu 4MP IP camera quotation
Eyonic Sdn Bhd plans, supplies and installs monitoring systems with camera placement, recording and remote viewing for homes, offices, shops and industrial sites in Sarawak. The quotation follows the site, not a price list.
- Site survey. the property is reviewed for camera positions, lighting at each position, cable routes and existing network or power infrastructure.
- System proposal. the camera form factors, lens choices, recorder channels and storage are matched to what the survey found, and the scope is set out before any work begins.
- Installation. cameras are mounted, cabled and connected, and the recorder is configured for the agreed recording rules.
- Handover. mobile viewing is set up on the user's devices, recording is confirmed, and the system is explained so daily operation does not depend on the installer.
That sequence is why a figure cannot be given before the survey. The same camera model can sit in a straightforward single-camera addition or in a multi-camera system with new cabling and a larger recorder, and the two are not the same job.
Eyonic's published package pricing starts at RM 1,599 for a Hikvision CCTV package covering camera supply and setup, basic recording configuration and mobile viewing handover. That figure describes a package scope, not a standalone ColorVu 4MP camera unit, and it is not a quotation for a specific site. Larger projects sit well above it: the Kuching Immigration Office project, which covered arrival flow, staff areas, visitor movement and dependable daily operation, carried an approximate budget of RM 12,000 to RM 28,000, and the KTA Sarawak Sdn Bhd office project in Kuching carried an approximate budget of RM 8,000 to RM 18,000.
Those two figures are the clearest available guide to how project scope moves cost in Sarawak. A public office with multiple zones and continuous daily use sits at the upper end. A single office fit-out with a smaller camera count sits lower. A single camera added to an existing system sits lower again.
Why no fixed figure is published for this camera
Publishing a single number for a ColorVu 4MP camera would be misleading, because the camera is rarely bought alone. It is bought as part of a system that includes a recorder, storage, cabling and configuration, and the price of that system is set by the site.
There is also a practical reason. Camera pricing moves with stock, model revision and supplier terms, and a figure published today can be wrong next month. A quotation built from a survey stays accurate because it is tied to a specific scope rather than a catalogue line.
What to prepare before asking for a figure
Three pieces of information shorten the path to a usable number: the location and property type, the areas that need coverage, and whether the requirement is a new system or an addition to an existing one. A rough camera count and any known retention requirement help as well.
With those, a supplier can tell whether the job is a straightforward package or a surveyed project, and can say which it is before anyone visits. Without them, any figure given is a guess.
Judging whether a quotation is reasonable
A quotation that lists only camera units and a total is hard to assess. A usable one separates the camera bodies, the recorder and storage, the cabling and mounting, and the configuration and handover. That breakdown shows where the money is going and makes it possible to compare two quotations on the same basis.
It should also state the scope plainly: how many cameras, which positions, what retention period, and whether remote viewing setup is included. Where a quotation is silent on those points, the gap usually becomes a variation later.
For a site in Sarawak, the practical next step is to share the location, property type and required system with Eyonic on WhatsApp at +60 11-5111 7959, so the scope can be established before a figure is put to it.