That single figure is the clearest published reference point from a Sarawak supplier, and it is a package price rather than a per-camera price. Understanding what sits inside it matters more than comparing headline numbers, because two quotes for the same property can differ by thousands of ringgit while describing almost identical hardware.
Full Hd Cctv Camera Price in Malaysia: What the Figure Includes
A quoted full hd cctv camera price can mean at least four different things, and suppliers rarely label which one applies. The cheapest reading is camera supply only: a boxed unit handed over with no cable, no recorder and no labour. The next is a kit price, where cameras, a recorder and cabling arrive together but installation is separate. The third is a package price covering supply, installation and configuration. The fourth is a project price covering a full site, multiple camera positions and integration with other systems.
Eyonic's published Hikvision CCTV Package at RM 1,599 sits in the third category. The listed scope covers camera supply and setup, basic recording configuration, and mobile viewing handover. That combination is what separates a package from a bare camera listing, because the buyer receives a working system rather than components.
Two Eyonic project budgets show how far the fourth category can stretch. Work for the Kuching Immigration Office carried an approximate budget of RM 12,000 to RM 28,000, and the KTA Sarawak Sdn Bhd office project carried an approximate budget of RM 8,000 to RM 18,000. Both were office environments in Kuching requiring multiple camera positions, tidy cabling and daily operational reliability. Neither figure represents a single camera.
The practical consequence is that a full hd cctv camera price quoted without a scope statement cannot be compared against another quote. A RM 300 figure and a RM 1,599 figure may describe entirely different deliverables.
Why Full Hd Cctv Camera Pricing Varies Between Suppliers
Four variables account for most of the spread between quotes for comparable properties.
- Camera count and position difficulty. A camera mounted above an existing ceiling void needs less labour than one requiring conduit across a finished wall. Position count drives both hardware and installation time.
- Cabling route and distance. Cable runs through existing trunking cost less than new surface trunking or concealed routing. Distance also affects signal quality on coaxial systems.
- Recorder and storage. The recorder determines how many cameras the system supports and how footage is retained. Storage capacity is a separate cost line from the cameras themselves.
- Configuration and handover. Remote viewing setup, user accounts and a walkthrough of the mobile app take time. Some suppliers bundle this, others treat it as an extra.
Brand choice also moves the number. Hikvision hardware is widely distributed in Malaysia, which keeps supply predictable, but the same specification from a less common brand can price differently for reasons unrelated to image quality.
One further variable is often invisible in a written quote: whether the supplier has surveyed the site. A price given without a site survey is an estimate built on assumptions about ceiling type, power availability and cable routing. Those assumptions frequently change once someone stands in the building.
What a Full Hd Cctv Camera Package Covers at RM 1,599
The RM 1,599 Hikvision CCTV Package is the only published Eyonic CCTV package figure that applies directly to cameras. Its stated scope has three parts: camera supply and setup, basic recording configuration, and mobile viewing handover.
Camera supply and setup means the hardware is provided and mounted, not merely delivered. Basic recording configuration means the recorder is set to capture footage, which is the step that turns a set of cameras into a usable monitoring system. Mobile viewing handover means the buyer is shown how to view footage remotely, which is the feature most buyers actually want and the one most often left unfinished.
What the published figure does not state is equally important. No per-camera price, no resolution specification for individual models, no storage capacity, no recording retention period and no warranty term are published alongside it. Any of those details would need confirmation against a specific proposal rather than assumed from the headline number.
For comparison, Eyonic lists two other packages at the same RM 1,599 figure: a Hikvision Alarm System covering control panel, sensors, siren and zone setup with user testing and handover, and an Autogate Package covering motor recommendation, remote-control setup and safety testing with handover. The matching price points suggest a deliberate entry-level tier rather than a discount on one product line.
How Eyonic Plans a Full Hd Cctv Camera Installation
Eyonic's published CCTV installation process runs through four stages, and the sequence matters because each stage constrains the next.
- Site survey. The property is assessed before any price is confirmed, covering camera positions, cable routes, power availability and lighting conditions.
- System proposal. A proposal is prepared from the survey findings, setting out the camera positions, recorder arrangement and configuration scope.
- Installation. Cameras are mounted, cabling is run, and the recorder is configured to capture footage.
- Handover. The system is demonstrated, remote viewing is set up, and the user is shown how to operate it.
Eric Yong, founder of Eyonic Security Systems, has worked in the industry for more than ten years and is experienced in technical installation of digital security solutions for commercial businesses in Sarawak. That background shapes the survey stage, because commercial sites tend to raise questions about cable routing and staff movement that a residential property does not.
The Kuching Immigration Office project illustrates how the process adapts to a public building. The work focused on arrival flow, staff areas, visitor movement and dependable daily operation. Those are coverage priorities rather than camera counts, and they determine where cameras go before any hardware is chosen.
The KTA Sarawak Sdn Bhd project shows a different emphasis: a practical office setup in Kuching supporting staff movement, visitor handling, tidy cabling and clearer daily site control. Tidy cabling appears as an explicit requirement, which is a reminder that installation quality affects the final price as much as camera specification does.
Lighting and Placement Checks Before Confirming a Full Hd Cctv Camera Price
Camera placement decisions are made before the price is fixed, because moving a camera after installation means re-running cable. Eyonic recommends checking actual lighting conditions before confirming placement for ColorVu-style cameras, which are designed to produce usable colour images in low light.
That check exists because manufacturer claims and site reality diverge. A camera rated for low-light colour performance may still struggle under a particular combination of ambient light, reflective surfaces and the distance between the camera and the subject. Verifying conditions on site removes the guesswork.
Several checks belong in that assessment:
- Lighting at the actual position. Conditions are assessed where the camera will be mounted, not in a nearby area that happens to be brighter.
- Coverage area and field of view. The area requiring coverage determines lens choice and mounting height, since a wider view trades detail for range.
- Recording setup and retention. How long footage needs to be kept affects storage sizing, which is a cost line separate from the cameras.
- Power and cable route. Available power points and viable cable paths constrain where cameras can realistically go.
Placement also has an edge case worth naming. A camera positioned to cover an entrance may capture a neighbouring property or a public walkway, and that framing decision is easier to adjust before installation than after.
Comparing Full Hd Cctv Camera Quotes in Sarawak
Sarawak buyers face a specific comparison problem: most search results for a full hd cctv camera price return marketplace listings from outside Malaysia, priced in foreign currency with no installation, no site survey and no local support. Those listings are not wrong, but they answer a different question from the one a property owner in Kuching is asking.
A useful comparison starts by establishing what each quote includes. The following questions separate a genuine package from a hardware price:
- Does the figure cover camera supply only, or supply with installation and configuration?
- Is a site survey included before the price is confirmed, or is the figure an estimate based on assumptions?
- Is remote viewing setup and handover part of the scope?
- What happens to the price if the required camera count changes after the survey?
Local supply matters for a practical reason. Hardware sourced internationally may arrive without local support arrangements, and a fault that requires replacement parts can leave a system partially offline for weeks. A supplier operating in Sarawak can attend the site.
Eyonic Sdn Bhd plans, supplies and installs monitoring systems with camera placement, recording and remote viewing for homes, offices, shops and industrial sites. The published project budgets of RM 8,000 to RM 18,000 and RM 12,000 to RM 28,000 both relate to office environments in Kuching, which gives a realistic sense of where multi-camera commercial work lands. A single-camera residential setup sits far below those figures, and the RM 1,599 package is the published entry point.
Share your location, property type and required system with Eyonic on WhatsApp at +60 11-5111 7959 for the next practical step.